Editorial Board Members (150)
-
Prof. Anita Ptiček Siročić
Faculty of Geochemical Engineering, University of Zagreb, Varaždin, Croatia
-
Prof. Hae Woon Choi
Department of Mechanical and Automotiv Engineering, Keimyung University, Daegu, South Korea
-
Assoc. Prof. Slavko Kralj
Jožef Stefan Institute, Ljubljana, Slovenia
-
Assoc. Prof. Rostand Tayong Boumda
School of Computer Science and Technology, University of Bedfordshire, Luton, United Kingdom
-
Dr. Rashi Gusain
Department of Applied Sciences, Northumbria University, Newcastle Upon Tyne, United Kingdom
-
Dr. Gaurav Pande
Department of Chemical and Biological Engineering, University of Colorado Boulder, Boulder, United States
-
Dr. Pietro Mazzuca
Department of Civil Engineering, University of Calabria, Rende, Italy
-
Dr. Sen Wang
School of Chemistry and Physics, Queensland University of Technology, Brisbane, Australia
-
Dr. Jiantao Wang
KAUST Solar Center, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
-
Dr. Monika Poonia
Department of Chemistry and Biochemistry, The Ohio State University, Columbus, United States
-
Dr. José Ferreira
Department of Materials Science and Engineering, Iowa State University, Ames, United States
-
Dr. Anirban Kundu
Center for Multidimensional Carbon Materials, Institute for Basic Science, Ulsan, South Korea
-
Dr. Samapika Mallik
Department of Human Intelligence Systems, Kyushu Institute of Technology, Kitakyushu, Japan
-
Dr. Zhijun Liu
Department of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, United States
-
Dr. David Maldonado
Materials Research, Innovations for High Performance Microelectronics, Frankfurt, Germany
-
Dr. Yongjoo Cho
Kyulux Inc., Fukuoka, Japan
-
Dr. Jehad Kharraz
Department of Chemical Engineering, Khalifa University, Abu Dhabi, United Arab Emirates
-
Sylwia Olenska
Institute of Wood Sciences and Furniture, Warsaw University of Life Sciences, Warsaw, Poland
-
Muhanna Al-Muhanna
Advanced Manufacturing Technologies Institute, Industry and Energy Sector, King Abdulaziz City for Science and Technology, Riyadh, Saudi Arabia
-
Muhammad Asif Nawaz
Department of Inorganic Chemistry and Materials Sciences Institute, University of Seville, Seville, Spain
-
Japhet Tiegoum Wembe
Department of Civil Engineering, CY Cergy Paris University, Cergy, France
-
Jixing Cao
Department of Civil and Environmental Engineering, National University of Singapore, Singapore
-
Prof. Saim Ates
Forest Industrial Engineering, Kastamonu University, Kastamonu, Turkey
-
Prof. Jian Peng
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China
-
Prof. Atilla Evcin
Department of Materials Science and Engineering, Afyon Kocatepe University, Afyonkarahisar, Turkey
-
Prof. Ariosto Medina
Research Institute in Metallurgy and Materials, Michoacan University of Saint Nicholas of Hidalgo, Morelia, Mexico
-
Prof. Xiaogang You
Zhongyuan Critical Metals Laboratory, Zhengzhou University, Zhengzhou, China
-
Assoc. Prof. Likai Yang
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou, China
-
Assoc. Prof. Jian Zhao
College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan, China
-
Assoc. Prof. Xiaofang Zhao
School of Mathematics, Statistics and Mechanics, Beijing University of Technology, Beijing, China
-
Assoc. Prof. Fatih Mehmet Coşkun
Department of Physics Engineering, Istanbul Medeniyet University, Istanbul, Turkey
-
Assoc. Prof. Chuan Guo
Department of School of Advanced Manufacturing, Sun Yat-Sen University, Shenzhen, China
-
Assoc. Prof. Jianfei Liu
Northwest Institute for Non-Ferrous Metal Research, Xi'an, China
-
Assoc. Prof. Nürettin Akçakale
Department of Textile, Clothing, Footwear and Leather, Bolu Abant Izzet Baysal University, Bolu, Turkey
-
Assoc. Prof. King Jye Wong
Faculty of Engineering and Science, Curtin University Malaysia, Miri, Malaysia
-
Dr. Wang Haoying
Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China
-
Dr. Chengcheng Fan
School of Infrastructure Engineering, Dalian University of Technology, Dalian, China
-
Dr. Tao Chen
Research Institute of Technology, Shougang Group Co., Ltd, Beijing, China
-
Dr. Long Wang
Science and Technology on Reliability and Environmental Engineering Laboratory, Beijing Institute of Structure and Environment Engineering, Beijing, China
-
Dr. Zheng Wei Li
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Haerbin, China
-
Dr. Wei Li
Division of Surface Engineering of Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
-
Dr. Mina Namvari
Sabancı University Nanotechnology Research and Application Center, Sabancı University, Istanbul, Turkey
-
Yiqi Fang
Xi'an Institute of Electronic Engineering, China North Industries Group Corporation Limited, Xi'an, China
-
Shaohua Li
College of New Energy, China University of Petroleum (East China), Dongying, China
-
Zohreh Shahnavaz
Materials Science and Engineering School, Jiangsu University, Zhenjiang, China
-
Bin Zhang
School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou, China
-
Abeer Adel Salih
Department of Mechanical and Manufacturing Engineering, National University of Malaysia, Selangor, Malaysia
-
Todorka Vladkova
Department of Polymer Engineering, University of Chemical Technology and Metallurgy, Sofia, Bulgaria
-
Mao Fu
College of Geography and Environmental Science, Guizhou Normal University, Guizhou, China
-
Aizuddin Supee
Department of Energy Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Johor Bahru, Malaysia
-
Prof. Mohamed Yagoub
Department of Civil Engineering, University of Biskra, Biskra, Algeria
-
Assoc. Prof. Ibrahim Yaacoub Bouderbala
Department of Optics, Ferhat Abbas University Setif 1, Setif, Algeria
-
Dr. Manikandan Maruthappan
Department of Physics and Materials Sciences, Chiang Mai University, Chiang Mai, Thailand
-
Dr. Senthilkumar Nangan
Metallurgy and Materials Science Research Institute, Chulalongkorn University, Bangkok, Thailand
-
Dr. Manoj Kumar Singh
Department of Materials and Production Engineering, King Mongkut's University of Technology North Bangkok, Bangkok, Thailand
-
Prof. Ravindranadh Koutavarapu
Department of Basic Sciences and Humanities, GMR Institute of Technology, GMR Nagar, Rajam, Vizianagaram-532127, India
-
Prof. Dheerendra Singh Yadav
Department of Physics, Chaudhary Charan Singh Post Graduate College, Etawah, India
-
Prof. Jinnah Sheik Mohamed M
Department of Mechanical Engineering, Nellai College of Engineering, Tirunelveli, India
-
Prof. Jasbeer Singh Sidhu
Department of Mechanical Engineering, MGM's College of Engineering and Technology, Nanded, India
-
Prof. A Vijay Kumar
Department of Mechanical Engineering, Raghu Engineering College, Visakhapatnam, India
-
Assist. Prof. Rajesh Jha
Department of Electronics and Communication Engineering, ICFAI Foundation for Higher Education, Hyderabad, India
-
Assist. Prof. Sunil Kumar
Department of Electronic Science, Babasaheb Bhimrao Ambedkar Bihar University, Bihar, India
-
Assoc. Prof. Ashok Atulkar
Department of Mechanical Engineering, Shri Govindram Seksaria Institute of Technology and Science, Indore, India
-
Assoc. Prof. Vijayalakshmi Sanyal
PG And Research Department Of Physics, Thiru. A. Govindasamy Government Arts College, Tindivanam, India
-
Assoc. Prof. Vijayalaxmi Sonkamble
Department of Mechanical Engineering, Jawaharlal Nehru Engineering College, MGM University Aurangabad, Aurangabad, India
-
Assoc. Prof. Pramod Bhingole
Department of Mechanical and Aerospace Engineering, Institute of Infrastructure, Technology, Research and Management, Ahmedabad, India
-
Assoc. Prof. Sunu Surendran K. T.
Department of Mechanical Engineering, KMCT College of Engineering, Calicut, India
-
Assoc. Prof. Sonu Saini
Department of Mechanical Engineering, Anand International Collge of Engneering, Jaipur, India
-
Dr. Swetarekha Ram
Department of Physics, Indo-Korea Science and Technology Center, Bangalore, India
-
Dr. Vinit Sharma
Shoolini Lifesciences Pvt. Ltd., Shoolini University, Solan, India
-
Dr. Prakash Sarkar
Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai, India
-
Dr. Arpana Parihar
Microfluidics and MEMS Center, CSIR- Advanced Material Process Research Institute, Bhopal, India
-
Balaga Viswanadham
GMR Institute of Technology, Rajam, India
-
Infanta Diana Michael
Department of Physics, Bharathiar University, Coimbatore, India
-
Madhu P
Department of Mechanical Engineering, Malnad College of Engineering, Hassan, India
-
Manujesh B J
Department of Mechanical Engineering, Vivekananda College of Engineering and Technology Puttur, Puttur, India
-
Prof. António Magalhães
Department of Mechanical Engineering, Polytechnic Institute of Porto, Porto, Portugal
-
Prof. Vassilis Kostopoulos
Department of Mechanical Engineering and Aeronautics, University of Patras, Patras, Greece
-
Assoc. Prof. Xingjian Xue
Department of Mechanical Engineering, University of South Carolina, Columbia, United States
-
Dr. Haroune Rachid Ben Zine
Department of Thin-Film Physics, Institute of Technical Physics and Materials Science, Budapest, Hungary
-
Dr. Mrinal Hota
Materials Research Lab, University of Illinois Urbana-Champaign, Urbana, United States
-
Dr. Wenyou Zhang
Department of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, Dublin, Ireland
-
Dr. Rupesh Kandel
Department of Bionanotechnology and Bionanoconvergence Engineering, Jeonbuk National University, Jeonju, South Korea
-
Dr. Xingyi Shi
Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong
-
Dr. Krishna Chaitanya Pitike
Nuclear Sciences Division, Pacific Northwest National Laboratory, Richland, United States
-
Dr. Parvaneh Esmaeilnejad-Ahranjani
Department for Materials Synthesis, Jožef Stefan Institute, Ljubljana, Slovenia
-
Dr. Jialiang Wang
Department of Civil and Architectural Engineering, Aarhus University, Aarhus, Denmark
-
Dr. Azam Nasirian
Department of Energy System Research, Ajou University, Suwon, South Korea
-
Dr. Sacha Cavelier
ARC Training Centre for Cell and Tissue Engineering Technologies, Queensland University of Technology, Brisbane, Australia
-
Dr. Prabhat Tripathy
Idaho National Laboratory, Idaho Falls, United States
-
Dr. Satyaranjan Bairagi
Systems Power and Energy Materials and Manufacturing Research Group University of Glasgow Glasgow, G12 8QQ, UK, Glasgow, United Kingdom
-
Dr. Preeti Gupta
Institute of Integrative Nanoscience, Leibniz Institute for Solid State and Materials Research, Dresden, Germany
-
Mallikarjuna Reddy Kesama
Department of Physics, Sungkyunkwan University, Suwon-si, South Korea
-
Mounarik Mondal
Department of Mechnanical Engineering, Kongju National University, Cheonan, South Korea
-
Melike Dizbay-Onat
Department of Mechanical Engineering, University of South Alabama, Mobile, United States
-
Reham Shabara
Department of Physics, Collage of Sciences, Taibah University, Almadinah-Almunawara, Saudi Arabia
-
Iryna Galstian
Department of Electronic Structure and Electronic Properties, Leibniz Institute for Solid State and Materials Research, Dresden, Germany
-
Prof. Weiwei Dong
College of Mechanical Engineering, Donghua University, Shanghai, China
-
Prof. Guoliang Qin
School of Materials Science and Engineering, Shandong University, Ji’nan, China
-
Prof. Aydin Şik
Department of Industrial Design, Gazi University, Ankara, Turkey
-
Prof. Eduardo Nobrega
Department of Quantum Electronics, Rio de Janeiro State University, Rio de Janeiro, Brazil
-
Prof. Peter Rusinov
Department of Control Systems, Materials and Technologies in Mechanical Engineering, Institute of Mechanics, Robotics, Engineering of Transport and Technical Systems, Krasnodar, Russian Federation
-
Assist. Prof. Mustafa Engin Kocadağistan
Department of Metallurgy and Materials Engineering, Ataturk University, Erzurum, Turkey
-
Assoc. Prof. Yong Gao
Institute of Science and Technology for New Energy, Xi'an Technological University, Xi'an, China
-
Assoc. Prof. Xianmou Fan
Department of Plastic Surgery, Guangdong Provincial Key Laboratory of Autophagy and Major Chronic Non-communicable Diseases, Zhanjang, China
-
Assoc. Prof. Hüseyin Fırat Kayıran
Department of Mechanics, Agricultural and Rural Development Support Institution, Mersin, Turkey
-
Assoc. Prof. Bingrong Miao
State Key Laboratory of Rail Transit Vehicle System, Southwest Jiaotong University, Chengdu, China
-
Assoc. Prof. Ming Wang
School of Mechanical Engineering, Ningxia University, Yinchuan, China
-
Assoc. Prof. Vinícius Veloso
Department of Mechanical Engineering, Centro Universitário UNA, Belo Horizonte, Brazil
-
Dr. Yongchun Xiao
College of Materials Science and Engineering, Hunan University, Changsha, China
-
Dr. Muhammad Sajid Khan
Department of Mechanical Engineering, Institute of Innovation Research of Shengzhou, Zhejiang University of Technology, Shengzhou, China
-
Dr. Nouman Ali Shah
School of Material Science and Engineering, Sun Yat Sen University, Guangzhou, China
-
Dr. Liangjuan Gao
College of Materials Science and Engineering, Sichuan University, Chengdu, China
-
Dr. Huiying Qi
College of Chemistry and Bioengineering, Shandong University of Science and Technology, Qingdao, China
-
Dr. Sun Zhaoqian
State Key Laboratory of Nonferrous Metals and Processes, Grimat Engineering Institute Co., Ltd., Beijing, China
-
Dr. Lushi Kong
State Key Laboratory for Performance and Structure Safety of Petroleum Tubular Goods and Equipment Materials, CNPC Tubular Goods Research Institute, Xi'an, China
-
Dr. Xiangyang Lou
Department of Environment, Southern University of Science and Technology, Shenzhen, China
-
Jin-Shui Yang
Qingdao Innovation and Development Base, Harbin Engineering University, Qingdao, China
-
Di Wang
School of Mechanical and Materials Engineering, Xi'an University, Xi'an, China
-
Ramiro Escudero
Department of Extractive Metallurgy, University of Morelia, Morelia, Mexico
-
Ruiji Li
School of Pharmacy, Jining Medical University, Rizhao, China
-
Yang Li
Bingtuan Energy Development Institute, Shihezi University, Shihezi, China
-
Evando Araújo
Department of Materials Science, Federal University of the São Francisco Valley, Pernambuco, Brazil
-
Qian Zhang
School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao, China
-
Ion Valentin
Innovation Center in Photonics and Plasma for Advanced Materials and Technologies Fotoplasmat, National Institute for Laser, Plasma and Radiation physics, Magurele, Romania
-
Assoc. Prof. Mohamed Lahoual
Department of Physics, University of Djelfa, Djelfa, Algeria
-
Dr. Badis Rahal
Department of Materials Physics, Algiers Nuclear Research Center, Algiers, Algeria
-
Dr. Ipfi Mathoho
Department of Manufacturing, Council for Scientific and Industrial Research, Pretoria, South Africa
-
Dr. Mourad Azibi
Department of Ionized Media and Laser, Center for Development of Advanced Technologies, Algiers, Algeria
-
Amel D. Hussein
College of Dentistry, Wasit University, Kut, Iraq
-
Prof. Sivarama Krishnaiah
Department of Mechanical Engineering, SVR Engineering College, Nandyal, India
-
Prof. Rajesh Narayana Perumal
School of Science and Humanities, Shiv Nadar University, Chennai, India
-
Prof. Himanshu Narayan
Department of Physics, Usha Martin University, Ranchi, India
-
Prof. Manoj Kumar
Metal Extraction and Recycling Division, Council of Scientific and Industrial Research-National Metallurgical Laboratory, East Singhbhum, India
-
Prof. Sanjeev Kumar Verma
Department of Civil Engineering, School of Engineering and Technology, Sanjeev Agrawal Global Educational University, Bhopal, India
-
Assist. Prof. Monalisa Char
Department of Materials Science and Technology, Maulana Abul Kalam Azad University of Technology, Kolkata, India
-
Assist. Prof. Sheetal Chopra
Department of Fabric and Apparel Science, Lady Irwin College, University of Delhi, New Delhi, India
-
Assoc. Prof. R Vara Prasad Kaviti
Department of Mechanical Engineering, Brindavan College of Engineering, Bangalore, India
-
Assoc. Prof. P Baraneedharan
Centre of Excellence in Photonics and Nanotechnology Research, Saveetha Engineering College, Chennai, India
-
Assoc. Prof. Thanuj Kumar M
Department of Robotics and Automation, Rajarajeswari College of Engineering, Bengaluru, India
-
Assoc. Prof. Sorna Gowri Vijaya Kumar
Department of Industrial Waste Utilisation Nano and Biomaterials, Council of Scientific and Industrial Research-Advanced Materials and Processes Research Institute, Bhopal, India
-
Assoc. Prof. Saravanan M Paramasivam
Department of Mechenical Engineering, Saveetha Engineering College, Chennai, India
-
Assoc. Prof. Rajendran Chinnasamy
Department of Mechanical Engineering, Sri Krishna College of Engineering and Technology, Coimbatore, India
-
Dr. Murtuja Husain
Department of Materials Engineering, Council of Scientific and Industrial Research-National Metallurgical Laboratory, Jamshedpur, India
-
Dr. Dipendra Singh Rawal
Solid State Physics Laboratory , Defence Research and Development Organisation, Min of Defence, Govt of India, Delhi, India
-
Dr. Archana Sharma
Department of Physics, Indian Institute of Technology Bombay, Mumbai, India
-
Dr. Saisree S
Department of Material Science and Technology, CSIR - National Institute For Interdisciplinary Science and Technology, Trivandrum, India
-
Md Dilwar Alam Khan
Department of Chemistry, Srikishan Sarda College, Hailakandi, India
-
Durga Prasad
Advanced Materials and Characterization Research Group, Research and Development, TATA Steel Ltd, Jamshedpur, India
-
Sai Prasad Nayak
Department of Chemistry, Dayananda Sagar University, Bangalore, India
