International Journal of Materials Science and Applications

Volume 5, Issue 2, March 2016

  • Effect of Heating Atmosphere and Alkali Metal Doping on the Acidic and Basic Sites of Magnesium Oxide

    Muhammad Bilal, Samuel David Jackson, Alexander Leishman Munnoch, Javed Ali

    Issue: Volume 5, Issue 2, March 2016
    Pages: 36-42
    Received: 5 January 2016
    Accepted: 25 January 2016
    Published: 6 March 2016
    Downloads:
    Views:
    Abstract: Reaction can either be acid or base catalysed. Among the different base catalysed reactions MgO has attracted keen interest from researchers in the last two decades. For different types of reactions different base strength catalyst is required. The basic strength of MgO can be modified in different ways including alkali metal doping of MgO which is... Show More
  • The Effect of Repair Welding Number on Microstructure of Hastelloy X Fabricated via TIG Process

    Mohammad Reza Abedi, Hamed Sabet, Hossein Razavi

    Issue: Volume 5, Issue 2, March 2016
    Pages: 43-48
    Received: 22 November 2015
    Accepted: 5 December 2015
    Published: 21 March 2016
    Downloads:
    Views:
    Abstract: The effect of repair welding number on microstructure of the hastelloy X fabricated via TIG process was investigated. The SEM, EDS and OM were used to determine mechanical properties and the microstructure of HAZ zone, respectively. Results showed that the grain size of base metal determined by OM and SEM was 64.11 μm with M6C and M23C6 carbides (6... Show More
  • Elastic Deformation Induced Non-equilibrium Segregation of P in IN718 Alloy

    Jinhui Du, Xudong Lu, Zhongnan Bi, Tingdong Xu

    Issue: Volume 5, Issue 2, March 2016
    Pages: 49-53
    Received: 24 March 2016
    Published: 25 March 2016
    Downloads:
    Views:
    Abstract: IN718 alloy is a precipitation hardened, nickel-based superalloy that is used extensively in the aircraft engine industry. The excellent cyclic fatigue resistance, high tensile strength, fracture toughness and oxidation resistance allow the alloy to be safely used at maximum useful service temperature of about 650ºC. Many researchers improve the al... Show More
  • Hydrothermal Synthesis and Luminescence Properties of Monodisperse Spherical CaF2 and CaF2:Ln3+ (Ln = Eu, Tb, Ce/Tb) Microcrystals

    Xiaohong Yang, Jingjing Cao, Shanshan Hu

    Issue: Volume 5, Issue 2, March 2016
    Pages: 54-60
    Received: 8 April 2016
    Published: 9 April 2016
    Downloads:
    Views:
    Abstract: Spherical CaF2 and CaF2:Ln3+ (Ln = Eu, Tb, Ce/Tb) with tunable particle size (about 2.5 µm) have been synthesized by one-step facile and effective hydrothermal method. The spherical structure was highly uniform and well-dispersed. It was found that reaction time, pH value, and reaction temperature have important effects on the controlled synt... Show More
  • Resistivity Quantitative Measurement Model and Accuracy Analysis of Hydrogen Content in Pure Aluminum

    Ling-qi Meng, Shi-wei Chen, Si-wei Luo, Heng-hua Zhang

    Issue: Volume 5, Issue 2, March 2016
    Pages: 61-65
    Received: 8 April 2016
    Published: 9 April 2016
    Downloads:
    Views:
    Abstract: Hydrogen content in pure aluminum melting was increased through inserting fresh branches and measured by decompression solidification method and density method. Resistivity of pure aluminum casting was measured by means of the electrical resistance method, and physical model of resistivity measuring method was established. Combined with experimenta... Show More
  • Development and Assessment of Composite Brake Pad Using Pulverized Cocoa Beans Shells Filler

    Adeyemi Ibukun Olabisi., Ademoh Nuhu. Adam, Okwu Modestus Okechukwu

    Issue: Volume 5, Issue 2, March 2016
    Pages: 66-78
    Received: 9 October 2015
    Accepted: 21 October 2015
    Published: 13 April 2016
    Downloads:
    Views:
    Abstract: Application of asbestos in friction material after a very long period is now discouraged due to its carcinogenic nature. There is need for alternative (human friendly) friction material. Hence the development of asbestos-free friction material from an agro-waste (cocoa beans shells - CBS) as filler element cum other additives was undertaken using p... Show More
  • The Research on the Production of Bio-based Polyamides 56 Sheath-core Composite Modified Fiber

    Shouyun Zhang, Jinghong Ma

    Issue: Volume 5, Issue 2, March 2016
    Pages: 79-83
    Received: 3 May 2016
    Published: 4 May 2016
    Downloads:
    Views:
    Abstract: In order to improve the moisture absorption, the antistatic properties of chemical fiber and improve the wearing comfort of fabric, the author has studied the modification and the production process of the sheath-core composite fiber which made of bio-based polyamide 56 and PET. Experiments show: selecting the appropriate production technology, usi... Show More
  • Microstructure and Properties of Cu/W85Cu/Cu Composites for Electronic Packaging

    Jia Jin-Hao, Bai Shu-Xin, Xiong De-Gan, Chang Jin, Gao Ming-Qi

    Issue: Volume 5, Issue 2, March 2016
    Pages: 84-88
    Received: 22 April 2016
    Published: 4 May 2016
    Downloads:
    Views:
    Abstract: The Cu/W85Cu/Cu composite was fabricated by pressureless infiltration and brazing method successfully. The microstructure and physical properties of Cu/W85Cu/Cu composites were investigated. The results show the interfacial region of Cu/W85Cu/Cu composites was consisted of Cu substrate, Cu–BAgCu28 interfacial layer, BAgCu28 layer, BAgCu28-Ni interf... Show More
  • Performance Simulation and Fabrication of PZT Piezoelectric Composite Ring

    Wang Hong-wei

    Issue: Volume 5, Issue 2, March 2016
    Pages: 89-94
    Received: 3 May 2016
    Published: 4 May 2016
    Downloads:
    Views:
    Abstract: High-frequency wideband omnidirectional transducer is the development direction of the research of underwater acoustic transducer, PZT piezoelectric composite ring is not only capable of horizontal omnidirectional transmitting and receiving underwater acoustic signal. Meanwhile, it also makes the bandwidth of the transducer is expanded. Using the A... Show More
  • Decreasing the Effect of Ultra Violet Ray on Polypropylene by Using Chromium Tri-oxide

    Zainab Fadhil Kadhim

    Issue: Volume 5, Issue 2, March 2016
    Pages: 95-101
    Received: 5 April 2016
    Accepted: 19 April 2016
    Published: 7 May 2016
    Downloads:
    Views:
    Abstract: Chromium tri-oxide (CrO3) /polypropylene sheets have been prepared by twin screw extruder machine. Polypropylene (PP) is being used in producing tanks, pressure vessels, and other outer doors applications to reduce original cost. The effect of ultraviolet ray has been studied because of the tertiary carbon bonds in PP chain structure is the center ... Show More
  • Research on Progress of Tribological Modification of Polyetheretherketone

    Li Shu Long, Wang Yan Jun, Qin Ke, Li Chao

    Issue: Volume 5, Issue 2, March 2016
    Pages: 102-107
    Received: 7 May 2016
    Published: 9 May 2016
    Downloads:
    Views:
    Abstract: The characteristics and application of poly ether ether ketone (PEEK) has been reviewed in the paper. The tribological modification of PEEK composites which were reinforced by inorganic fillers, the fiber, polymer blends, plasma and mixed modification were introduced. Finally research progress of tribological modification of PEEK composites was for... Show More
  • The Research Status of the Wetting of Metal/Ceramic in the High Temperature Self-Lubricating Materials

    Li Chao, Wang Yan Jun, Qin Ke, Li Shu Long

    Issue: Volume 5, Issue 2, March 2016
    Pages: 108-112
    Received: 7 May 2016
    Published: 9 May 2016
    Downloads:
    Views:
    Abstract: The wettability of solid lubricant and matrix sintered body is very important for the production of the high temperature self-lubricating composite material. The wettability of the metal/ceramic is ubiquitous phenomenon in materials science and people have long the research in this field. Research on the wettability of the ceramic/metal has importa... Show More
  • Effect of Wood Shaving to Improve the Properties of Particleboard Made from Sorghum Bagasse

    Apri Heri Iswanto, Irawati Azhar, Arida Susilowati, Supriyanto, Andrianta Ginting

    Issue: Volume 5, Issue 2, March 2016
    Pages: 113-118
    Received: 27 April 2016
    Accepted: 7 May 2016
    Published: 14 May 2016
    Downloads:
    Views:
    Abstract: The objective of this research was to evaluate the effect of wood shaving added to improve the mechanical properties of particleboard. Wood types were using in this research included of Meranti, Cempedak, Mahagony, and Durian wood. Ratio of Sorghum bagasse and wood shaving was 50/50 (%w/w). Amount of 10% urea formaldehyde (UF) resin used for bindin... Show More